| Power supply | 230 Vac |
| Design (panel size) | 32 x 74 mm |
| Type of regulation | On/off |
| Control input | Temperature sensor |
| Producer | Ascon Tecnologic |
| Output - relay | 1x |
| Display digit colour | Red |
| Auxiliary digital input | Yes |
The Ascon Tecnologic E30 is a digital thermostat, typically used for cooling or heating. When used for cooling, it allows passive defrosting of the evaporator of the cooling equipment by stopping the compressor. The Ascon Tecnologic E30 controller also allows detailed setting of alarm conditions and the controller's behaviour when they occur and are accepted.
Up to 2 NTC temperature sensors can be connected to the Ascon Tecnologic E33 thermostat, or one input can be used to connect an auxiliary digital contact. One relay is available at the output of the thermostat.
The clear advantage of this thermostat is its minimal installation depth (only 34mm) while maintaining standard front panel dimensions, and last but not least, its very low power consumption of approx. 2VA.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 VAC +/-10% 50/60 Hz |
| Consumption | approx. 2 VA |
| Input | 2x NTC (103AT-2, 10K? @ 25°C) Possibility to use one input for auxiliary dig. contact |
| Output | 1x SPST 16(9)A / 250 VAC relay |
| Temperature control | ON/OFF mode |
| Defrost control | passive, interval |
| Measuring range | NTC: -50...109 °C |
| Accuracy | ±0.5 % of range ±1 place |
| Operating conditions | 0 ... 50°C, < 95 RH% |
| Dimensions | 78 x 35 mm, depth only 34 mm |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.