| Power supply | 230 Vac |
| Design (panel size) | 32 x 74 mm |
| Type of regulation | On/off |
| Control input | Temperature sensor |
| Auxiliary digital input | Yes |
| Output - relay | 3x |
| Display digit colour | Red |
| Producer | Ascon Tecnologic |
The Ascon Tecnologic E33 is a digital controller, typically used in refrigeration equipment using On/Off compressor control. The controller allows for active evaporator defrost of the chiller by heating coils or reverse cycle (hot refrigerant vapor), or allows for heating/cooling control with or without a neutral zone, including the ability to control with independent setpoints for heating and cooling. The Ascon Tecnologic E33 controller also allows detailed setting of alarm conditions and the controller's behaviour when they occur and are accepted.
Up to 3 NTC temperature sensors can be connected to the Ascon Tecnologic E33 controller, or one input can be used to connect an auxiliary digital contact. For local reporting of alarm conditions, the controller includes an internal buzzer.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 VAC +/-10% 50/60 Hz |
| Consumption | approx. 3.5 VA |
| Input | 3x NTC (103AT-2, 10K? @ 25°C) Possibility to use one input for auxiliary dig. contact |
| Output | 1x SPST 16(9)A / 250 VAC relay 1x SPDT relay 8(3)A / 250 VAC 1x SPST 5(1)A / 250 VAC relay |
| Temperature control | ON/OFF mode |
| Defrost control | active, interval or temperature dependent |
| Measuring range | NTC: -50...109 °C |
| Accuracy | ±0.5 % of range ±1 place |
| Operating conditions | 0 ... 50°C, < 95 RH% |
| Dimensions | 78 x 35 mm, depth 64 mm |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.