Dixell XC1015D 1C01F controller for condensing units with 15 outputs

Dixell XC1015D controllers are designed for controlling compressor and condensing units. The control is two-position ON/OFF and the number and size of power stages, type of operation (direct/inverse) and 3 different control logics can be selected. Alarm conditions are indicated by a buzzer and alarm relay. The controllers record the operating hours of each load and give a signal for service inspection. Other features include energy saving control mode, dynamic setpoint or real-time setpoint reduction.

They can be connected via RS485 output to a serial link and further to a monitoring system. The controller can be programmed using the LCD graphic display VGC810 - VISOGRAPH, the VISOKEY programming key, the PROG TOOL programming module or the parameters can be programmed from a PC.

Main characteristics:
- 8 inputs and 23 configurable digital inputs
- 15 relay outputs
- 2 analogue outputs for compressors and 2 for fans
- proportional or neutral zone control
- temperature or pressure display according to the gas used
- ModBUS-RTU communication
- compressors : screw, scroll, semi-hermetic, multi-stage or with different outputs
- 2 fan circuits and 2 compressors