Dixell XH260L 500C0 thermostat for temperature and humidity control
Temperature and humidity controller for warehouses, ripening rooms and similar applications.
In stock
- For simultaneous temperature and humidity control
- Controls the cooling compressor, heater, dehumidifier and humidifier, plus controls the fan and evaporator defrost
| Power supply | 230 Vac |
| Design (panel size) | 38 x 185 mm |
| Type of regulation | On/off |
| Control input | Temperature sensor + analog signal |
| Auxiliary digital input | Yes |
| Output - relay | >5x |
| Display digit colour | Two colours |
| Producer | Dixell |
The XH260 series controllers are microprocessor controlled controllers suitable for normal and low temperature cooling applications. They are designed for temperature and humidity control, especially in food processing plants such as ripening rooms or cold stores with humidity control of goods.
They are equipped with up to 6 relay outputs, for compressor, heater, defrost, fan, dehumidifier and humidifier control. The instruments are also equipped with two NTC sensor inputs for temperature control, a 4-20 mA input for humidifier and one digital input (free contact) with configurable parameters. The output allows the user to program the instrument using a "Hot Key" programming key.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230Vac ± 10%, 50/60Hz |
| Power input | max. 7VA |
| Accuracy at 25°C | ±0.5°C ± 1 place |
| View | 0.1 °C or 1 °C (1 °F) |
| Front Panel Coverage | IP65 with RG-L seal |
| Temperature inputs | 2x NTC thermistor (-40...110°C) |
| Inputs - humidity | 1x current input 4...20mA |
| Other inputs | 2x digital voltage-free input |
| Outputs | Compressor: switching relay 20(8) A, 250Vac Heating: switching relay 8(3) A, 250Vac Fan: switching relay 8(3) A, 250Vac Humidifier: switching relay 8(3) A, 250Vac Defrost: switching relay 8(3) A, 250Vac Dehumidifier : switching relay 8(3) A, 250Vac |
| Other outputs | buzzer (optional) |
DescriptionTechnical parametersDownload