Dixell XJA50D 5N105 data acquisition module for Xweb monitoring systems
Dixell XJA50SL 50000 data acquisition module for Xweb monitoring systems
- Allows remote data acquisition from 5 logic potential inputs for 230Vac
- Used to capture logic signals and send them to the monitoring system via RS485 Modbus RTU
- Use e.g. for alarm message collection
- 1x alarm output relay for local alarm reporting
| Power supply | 230 Vac |
| Designation | Built-in |
| Record of measured quantity | Yes |
| Communication Bus | RS485 |
| Producer | Dixell |
The Dixell XJA50D is a logic data acquisition module (typically alarm or status messages) that can sense up to 5 230 Vac logic potential inputs, expandable to 10 with the Dixell XJA50SL add-on module. Using the RS485 Modbus RTU serial output, it can be connected to Dixell XWEB EVO monitoring systems or other compatible ModBUS RTU monitoring systems.
The XJA50D modules have no display and are programmed using the KB1 PRG programming keypad or RS485. They can also be programmed using "Hot key" programming keys and connected to an XJP REP display unit to show status. The Dixell XJA50D data acquisition module is equipped with an alarm output relay for the ability to report alarm conditions detected at the inputs.
XJA50D modules always use a unique communication serial address for each input. Programming of the modules can be done via the KB1 PRG programming keypad or via RS485.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 V AC, ±10% 50/60 Hz |
| Power consumption | 1.5VA max. |
| Inputs | 5x logic potential input 230 Vac |
| Alarm output relay | 5 A switching relay |
| RS485 output | rS485 serial output with ModBUS RTU protocol |
| Dimensions | 4 DIN modules 70x85 mm; depth 61 mm |
| Operating conditions | 0 to 60°C , 20 to 85% (non-condensing) |
| Storage temperature range | -30 to 85 °C |