Dixell XJP30D 5N0P3 data acquisition module for Xweb monitoring systems
DIN rail mounting, 3x PTC or NTC inputs and 3x potential logic input contact, 230Vac power supply, RS485
On request
- Used to sense temperature and/or logic signals and send them to the monitoring system via RS485 Modbus RTU
- 3x temperature PTC or NTC
- 3x logic potential input 230Vac
- RS485 Modbus output
| Power supply | 230 Vac |
| Designation | Built-in |
| Record of measured quantity | Yes |
| Communication Bus | RS485 |
| Producer | Dixell |
TheDixell XJP30D are data acquisition modules that can sense up to 3 analog PTC or NTC temperature inputs and 3 230 Vac logic potential inputs. They can be connected to Dixell XWEB EVO or other RS485 and ModBUS RTU compatible monitoring systems using the RS485 serial output. Dixell XJP30D DIN rail mount modules have no display and are programmed via the KB1 PRG programming keypad or via RS485. PTC or NTC signal can be connected to the 3 analog inputs, 230Vac can be connected to the 3 digital logic inputs. They can be programmed with "Hot key" programming keys and connected to the XJP REP display unit, which shows the main temperature and input status.
| TECHNICAL PARAMETERS | |
|---|---|
| Inputs | 3x PTC/NTC 3x potential logic input 230Vac |
| Outputs | rS485 serial output with ModBUS RTU protocol |
| Power supply | 230 Vac ±10%, 50/60 Hz |
| Power | approx. 3VA |
| Accuracy | ± 0,3 °C |
| Sampling time | 1 second |
| Operating conditions | 0...60°C, 20...80% humidity |
| Dimensions | 4 DIN rail modules (70x85x61mm) |
DescriptionTechnical parametersDownload