Dixell XJP40D 5C0R4 data acquisition module for Xweb monitoring systems
4x analogue temperature input Pt100 and 4x logic potential input, 230Vac power supply, RS485 output, DIN rail mounting.
In stock
- Used to sense temperature and/or logic signals and send them to the monitoring system via RS485 Modbus RTU
- 4x temperature input for PT100
- 4x logic potential input 230Vac
- RS485 Modbus output
| Power supply | 230 Vac |
| Designation | Built-in |
| Record of measured quantity | Yes |
| Communication Bus | RS485 |
| Producer | Dixell |
TheDixell XJP40D are data acquisition modules that can sense up to 4 analog temperature inputs from Pt100 sensors and 4 230 Vac logic potential inputs. They can be connected to Dixell XWEB EVO or other RS485 and ModBUS RTU compatible monitoring systems using the RS485 serial output. The DIN rail mounted Dixell XJP40D modules have no display and are programmed via the KB1 PRG programming keypad or via RS485. A Pt100 signal can be connected to the 4 analogue inputs and a 230Vac signal can be connected to the 4 digital logic inputs. They can be programmed with "Hot key" programming keys and connected to the XJP REP display unit, which shows the main temperature and input status.
| TECHNICAL PARAMETERS | |
|---|---|
| Inputs | 4x Pt100 4x potential logic input 230Vac |
| Outputs | rS485 serial output with ModBUS RTU protocol |
| Power supply | 230 Vac ±10 %, 50/60 Hz |
| Power | approx. 3VA |
| Accuracy | ± 0,3 °C |
| Sampling time | 1 second |
| Operating conditions | 0...60°C, 20...80% humidity |
| Dimensions | 4 DIN rail modules (70x85x61mm) |
DescriptionTechnical parametersDownload