Dixell XJP60D 5C0P3 data acquisition module for Xweb monitoring systems
DIN rail mounting, 6x PTC/NTC temperature input and 6x logic input (3x potential 230Vac, 3x potential-free instead of 3 analogue inputs), 230Vac power supply, RS485 Modbus RTU output
In stock
Dixell XJPREP remote red display for XJP30D and XJP60D modules
On request
36,11 EUR excl. VAT43,69 EUR
- Used to sense temperature and/or logic signals and send them to the monitoring system via RS485 Modbus RTU
- 6x temperature input for PTC / NTC
- up to 6x logic input (3x potential 230Vac, 3x potential-free instead of 3 analog temperature inputs)
- RS485 Modbus RTU output
| Power supply | 230 Vac |
| Designation | Built-in |
| Record of measured quantity | Yes |
| Communication Bus | RS485 |
| Producer | Dixell |
TheDixell XJP60D are data acquisition modules that can sense up to 6 analog temperature inputs and 3 digital potential inputs.The 3 analog temperature inputs are also configurable as digital potential-free inputs. Using the RS485 serial output, they can be connected to Dixell XWEB EVO monitoring units or to a ModBUS-RTU compatible monitoring system. The DIN rail mount XJP modules do not have a display and are programmed via the KB1 PRG programming keypad or via RS485. PTC or NTC sensors can be connected to the analog inputs. They can be programmed with "Hot key" programming keys and connected to an XJP REP display unit that shows the main temperature and input status.
| TECHNICAL PARAMETERS | |
|---|---|
| Analog inputs | 6x PTC/NTC |
| Additional inputs | 3x digital potential input 3x digital potential-free input (instead of 3 analogue inputs) |
| Outputs | rS485 serial output with ModBUS protocol |
| Power supply | 230 Vac ±10 %, 50/60 Hz |
| Power | approx. 6VA |
| Accuracy | ± 0,3 °C |
| Sampling time | 1 second |
| Operating conditions | 0...60°C, 20...80% humidity |
| Dimensions | 4 DIN rail modules (70x85x61mm) |
DescriptionTechnical parametersDownload