Dixell XR120D 5P0C1 cooling thermostat with RS485 and DIN rail buzzer
DIN mounted, 230Vac power supply, 2xPTC input (-50..150 °C), 1x output relay, alarm buzzer
On request
- 2 PTC/NTC inputs
- passive defrost
- one output relay
- rS485 output for monitoring
Dixell XR100D Series Comparison:
| XR120D | XR130D | XR140D | XR160D | XR170D | |
| Power supply | 230 Vac | 230 Vac | 230 Vac | 230 Vac | 230 Vac |
| Analog inputs: | |||||
| Thermostat | NTC, PTC | NTC, PTC | NTC, PTC | NTC, PTC | NTC, PTC |
| Defrosting | NTC, PTC | NTC, PTC | NTC, PTC | ||
| Remote display | NTC, PTC | NTC, PTC | NTC, PTC | NTC, PTC | NTC, PTC |
| Digital inputs: | |||||
| Alarm, defrost start, AUX, pressure switch, economy mode | Configurable | Configurable | Configurable | Configurable | Configurable |
| Door contact | yes | yes | yes | yes | yes |
| Output relay: | |||||
| Compressor | 8A | 8A | 8A | 8A | 8A |
| Defrosting | no 8A/ nc 5A | no 8A/ nc 5A | no 8A/ nc 5A | ||
| Fans | 8A | 8A | |||
| Alarm | 16A | 16A | |||
| Other features: | |||||
| Communication | RS485 | RS485 | RS485 | RS485 | RS485 |
| Alarm buzzer | yes | yes | yes | yes | yes |
| Power supply | 230 Vac |
| Design (panel size) | DIN |
| Type of regulation | On/off |
| Control input | Temperature sensor |
| Auxiliary digital input | Yes |
| Output - relay | 1x |
| Communication Bus | RS485 |
| Display digit colour | Red |
| Producer | Dixell |
The Dixell XR120C/D temperature-controlled controllers with passive defrost (compressor interruption) are designed for all normal and low temperature refrigeration applications. They are also equipped with one relay output. The XR130C/D controllers have the same features as the XR120 and are also equipped with a configurable auxiliary relay (alarm, etc.).
The controllers have an input for PTC or NTC sensors with the possibility of user configuration. The thermostats are connected to the monitoring system via RS485 serial interface and ModBUS-RTU protocol. All types are equipped with configurable digital input, door contact and buzzer. Parameters can be easily copied with the HOT KEY programming key.
| TECHNICAL PARAMETERS | |
|---|---|
| Input | 2 x PTC thermistor (-50...150°C) or NTC (-40...110°C) |
| Other inputs | 1 x digital config. input voltage-free 1 x door contact |
| Outputs | switching relay 8(3) A / 250 V rS485 output for monitoring buzzer |
| Power supply | 230 Vac ±10 %, 50/60 Hz |
| Power input | approx. 3VA |
| Dimensions | 4 DIN modules (70 x 85 x 61 mm) |
| Operating conditions | 0...60°C, 20...85% humidity |
DescriptionTechnical parametersDownload