Dixell XR60CX 5N0C1 cooling controller with fan control

The Dixell XR60CX models are microprocessor-based controllers, particularly suitable for medium or low temperature cooling applications. They are suitable for panel mounting and have dimensions of 32 × 74 mm. They feature three relay outputs: for compressor, fan and defrost control (can be either electric or reverse cycle - hot steam). They are equipped with up to four inputs for PTC or NTC temperature sensors. One for temperature control, the second located on the evaporator (used to control the defrost termination temperature and fan control), the third and fourth are optional (connected to the HOT KEY connector and to the dig.input) to signal a condensing temperature alarm or just to display any temperature on the remote display. The units also have a digital input for alarm signalling, for switching on the auxiliary output or for defrost triggering. The digital input can be optionally configured for a fourth temperature sensor.
The HOT KEY output can be used to connect the instrument (using the external XJ485-CX module) to a Dixell XWEB monitoring system. The instruments can be fully configured with parameters that can be easily programmed using the keypad or HOT KEY programming key. The compressor output relay has a load rating of 20A (8A inductive load). The other two relays have a load rating of 8A (3A inductive load).