Dixell XT110C 5N0AU controller with analog input
size 32x74mm, power supply 230Vac, analog input 4..20mA / 0..1V / 0..10V, output 1x relay
In stock
Carel SPKT0021D0 refrigerant pressure sensor, -0.5 to 7 bar, female thread
In stock
69,46 EUR excl. VAT84,05 EUR
- Two-state ON/OFF controller for controlling temperature, humidity, pressure, etc.
- One analogue programmable input
- One control output for direct or inverse operation (e.g. heating/cooling)
Dixell XT100C Series Comparison:
| XT110C | XT111C | XT120C | XT121C | XT130C | XT131C | XT141C | |
| Power supply | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac | 12, 24 Vacdc, 230 Vac |
| Inputs: | |||||||
| NTC, PTC, Pt100, TcJ, TcK, TcS, or 4..20mA, 0..1V, 0..10V | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable |
| Digital input | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable | 1x configurable |
| Output relay: | |||||||
| Stage 1 | 8A | 8A | 8A | 8A | 8A | 8A | 8A |
| Grade 2 | 8A | 8A | 8A | 8A | 8A | ||
| Grade 3 | |||||||
| Grade 4 | |||||||
| Alarm | 8A | 8A | 8A | 8A | |||
| Other features: | |||||||
| Communication | TTL | TTL | TTL | TTL | TTL | TTL | TTL |
| Analog output | |||||||
| Alarm buzzer | Optional | Optional | Optional | Optional | Optional | Optional | Optional |
| Power supply | 230 Vac |
| Design (panel size) | 32 x 74 mm |
| Type of regulation | On/off |
| Control input | Analog signal |
| Auxiliary digital input | Yes |
| Output - relay | 1x |
| Display digit colour | Red |
| Producer | Dixell |
The Dixell XT110C (in panel) models are two-state ON/OFF controllers for controlling temperature, humidity, pressure and other variables.
The analog input can be set to 4÷20mA, 0÷1V, 0÷10V signals.
All XT series controllers are equipped with a digital input, optional buzzer and can be programmed quickly and easily using the HOT KEY programming key. In the basic version there is also a TTL output for connecting the controller to serial communication.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 Vac ±10 %, 50/60 Hz |
| Power consumption | approx. 3VA |
| Accuracy at 25 °C | better than ± 0.5 °C |
| Sampling time | 1s |
| Front Panel Coverage | IP65 with RG-C seal |
| Input | current 4 to 20 mA voltage input 0 to 1/10 V |
| Other inputs | digital input - voltage-free contact |
| Output | switching relay 8(3) A / 250 V |
| Other outputs | TTL output for serial communication (output for HOT KEY programming key) |
DescriptionTechnical parametersDownload