Euroster 11E thermostat for circulation pump
- For heating systems with one circulating pump (heating or DHW)
- 2 operating modes (heating or DHW tank reheating)
- Protects the pump against clogging
- Adjustable hysteresis
- Temperature probes included
- Temperature calibration function
- Clear backlit display
- Promotional price
| Thermostat use (heating type) | For pumps |
| Power supply | 230 Vac |
| Switching signal transmission | Wired |
| Backlit display | Yes |
| Output relay function | Control only / appliance up to 250W |
| Designation | Wall-mounted |
| Producer | Euroster |
The Euroster 11E is a device used to control (switch on/off) the circulating pump of the heating system depending on the set temperature. The pump can be connected either to the heating circuit or to the DHW circuit.
As soon as the boiler water temperature is higher than the desired temperature (+hysteresis), the pump is started. To prevent the boiler from dewing, the temperature set by the rotary switch must be higher than the dew point temperature in the room. Stopping the pump after the boiler has been extinguished will prevent unwanted cold water flow into the heating system, which would rapidly reduce the temperature in the boiler and radiators.
The EUROSTER 11E is equipped with an ANTYSTOP system that protects the pump from clogging during prolonged inactivity (in the summer months). During the non-heating season, the pump starts for 30 seconds every 14 days.
Advantages of EUROSTER 11E:
- Selectable hysteresis
- Clear LCD display - backlit
- Temperature probes can be corrected
- Manual pump switching option
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230V 50Hz |
| Power input | max. 7 mA (1.6 W) |
| Max. output current | 3 A |
| Cable lengths | 1.5 m |
| Dimensions (W x H x D) | 150 x 90 x 54 mm |
| Hysteresis | selectable, 2-10°C |