Fan speed controller up to 500W Dixell XV105D 50DN0 with NTC input
DIN rail mounted, power supply 230Vac, NTC input, power consumption 500W, direct control mode
In stock
- Speed control of single-phase asynchronous fan motors
- suitable for industrial applications
- input for temporary maximum speed
- NTC input signal
- direct control mode
Comparison of the Dixell XV series:
| XV05PD | XV05PK | XV105D | XV110K | XV150K | |
| Power supply | 230 Vac | 230 Vac | 230 Vac | 230 Vac | 230 Vac |
| Control input signal | PWM | PWM | NTC, 4..20mA, 0..1V, 0..10V | NTC, 4..20mA, 0..1V, 0..10V | NTC, 4..20mA, 0..1V, 0..10V |
| Direct/inverse function | Optional | Configurable | Adjustable | ||
| Maximum starting speed | Adjustable | Adjustable | Adjustable | ||
| Starting signal | yes | yes | yes | yes | yes |
| Minimum speed setting | Adjustable | Adjustable | Adjustable | ||
| Trimming function (max. speed) | Adjustable | Adjustable | Adjustable |
| Power supply | 230 Vac |
| Design (panel size) | DIN |
| Control input | Temperature sensor |
| Output - relay | 0x |
| Analog output | Yes |
| Producer | Dixell |
The Dixell XV105D DIN rail mounted models are speed controllers suitable for industrial applications, especially for controlling airflow through a fan on a condenser or evaporator. By disconnecting an external switch, the maximum speed can be started for 10 seconds. The input can be a signal from an NTC temperature sensor, 4 to 20 mA, 0 to 1V, or 0 to 10V, depending on the model. This version allows speed control by direct control mode (as temperature increases, fan speed increases).
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 Vac, ±10%, 50/60 Hz |
| Power input | max 1 VA |
| Max. load | 500 W |
| Input | 1x NTC |
| Operating temperature | 0 to 60 °C |
| Relative humidity | 20 to 85% (non-condensing) |
| Storage temperature | -30 to 85 °C |
DescriptionTechnical parametersDownload