Universal GSM communicator Jablotron GD-04 DAVID

Universal programmable GSM communicator with a wide range of applications
Universal GSM communicator Jablotron GD-04 DAVID
on request on request
This product is not available for purchase
Unavailable
Code6-280-JA-010ProducerJablotronWarranty2 years
  • Provides 2 output power relays and 4 input terminals
  • The device can be conveniently set up using the web-based setup page
ProducerJablotron

Typical use:

  • Automatic sending of SMS message when the input with GND terminal is switched on (or off). Each input terminal (A to D) can be configured with message texts and up to 8 phone numbers to which the event is reported. In addition, the text message can be highlighted by a follow-up call to the phones to which the SMS was sent.
  • Switch controlled by SMS messages. You can set your own texts to turn each contact on and off.
  • A time switch that can be activated remotely by mobile phone (the switch-on time can be set from 1s to 10h).
  • Relay switched by ringing the phone. Each relay can be configured with up to 50 phone numbers to which it will respond. Ring control is free on the GSM network (David does not answer incoming calls, he only monitors who is calling and if it is a legitimate number, activates the relay on the first ring). This is useful e.g. for opening parking gates etc.
  • Relay switched by ringing from the phone with limited number of uses. A limit can be set when an authorised number is entered and once this limit is exceeded David ignores calls from this number. This is useful e.g. for subscription to a certain service (e.g. number of times a car park is used etc.). Further access can be enabled remotely (by SMS command) by the administrator.

TECHNICAL PARAMETERS
Power supply 11...13 Vdc
Idle/maximum consumption 20 mA / 500 mA
GSM operating band E-GSM 900 / 1800 MHz
Transmitter output power 2 W for GSM 900, 1 W for GSM 1800
Input terminals A,B,C,D activation by connection to GND
Load capacity of outputs X1,X2,Y1,Y2 resistive load: max. 2.5 A / 250 V AC
Inductive (capacitive), bulb load: max. 0.5 A / 250 V AC
Dimensions (without antenna) 76 x 110 x 33 mm
GSM antenna plugged into SMA connector
DescriptionTechnical parameters

This online store saves cookies that help its proper functioning. By using our services, you agree to their use.

Detailed settingsAllow everything