Pego ECP202 Expert D7.5 - Wall-mounted control panel for cold stores - max. 7.5 kW

All in One wall mounted controller for cold room - 1F compressor with max. power 1500W
Pego ECP202 Expert D7.5 - Wall-mounted control panel for cold stores - max. 7.5 kW
Pego ECP202 Expert D7.5 - Wall-mounted control panel for cold stores - max. 7.5 kW
Pego ECP202 Expert D7.5 - Wall-mounted control panel for cold stores - max. 7.5 kW (1)
Pego ECP202 Expert D7.5 - Wall-mounted control panel for cold stores - max. 7.5 kW (2)
211 EUR 175 EUR excl. VAT
On request
In person in Prague:on requestWith a delivery company:on request
CodePE-010-040PNmontáž na stěnu, napájení 230Vstř, 3f odtávání 7,5kW, rozměr 262x168 mmProducerPegoWarranty2 years

Dixell NG6 NTC temperature sensor

Dixell NG6 NTC temperature sensor
In stock
4,73 EUR excl. VAT5,72 EUR

Control panel for chillers with single-phase compressor and electric defrost (single or three-phase, up to 7500W),
specially designed to provide safety, security, control and ease of installation - all in one.

Power supply230 Vac
Design (panel size)Other
Type of regulationOn/off
Control inputTemperature sensor
Output - relay5x
Display digit colourRed
ProducerPego

Complete control of single-phase static or ventilated cooling systems up to 2 HP, with passive or powerful electric defrost and direct or pump-down compressor shutdown.
Evaporator control by solenoid valve only or by remote request to motor condensing unit.

Direct control of the compressor, defrost, evaporator fan and lighting with direct outputs to each device, or voltage-free contacts to control the condensing unit with its own electrical control.
Built-in electromagnetic circuit breaker for protection and shutdown of the refrigeration unit.
New innovative and elegant design. Transparent cover for access to the electromagnetic circuit breaker, all with IP 65 protection.
Auxiliary relay configurable parameters (alarm, setpoint, direct control via front buttons, door heater, remote control of the condensing unit motor, control of the solenoid valve to allow possible pump-down operation of the compressor).
RS485 for connection to Telenet monitoring system or output to standard Modbus-RTU protocol.
Easy installation and opening thanks to the new hinged cover.

TECHNICAL PARAMETERS
Dimensions 262 x 168 x 97 mm
Weight 0.6 kg
Power supply 230 V AC ± 10% 50/60 Hz
400 V AC 3/N ±10% 50/60 Hz
Consumption ~ 7 VA
Operating conditions -5 ... +50°C, < 90% Rh
Storage conditions -10 ... +70°C, < 90% Rh
Temperature sensors NTC 10 k?
Resolution 0,1 °C
Accuracy ± 0,5 °C
Range -45 ... +45 °C
Outputs Compressor: 1500 W
Defrost: 7500 W (3x 2500 W)
Fan: 500 W
Light: 800 W
Configurable Alarm/Aux output: yes
Monitoring system: Telenet, Modbus-RTU
El. protection El.mag. circuit breaker 16A (Id=300mA)
Id=30mA on request
Coverage IP65
Insulation type Class II
DescriptionTechnical parametersDownload

This online store saves cookies that help its proper functioning. By using our services, you agree to their use.

Detailed settingsAllow everything