Pego ECP202 Expert - Wall-mounted control panel for cold stores
Fan controller up to 500W Dixell XV105D 50DV0 with voltage input
- Control panel for refrigeration plants with single-phase compressor
- Specifically designed to ensure safety, protection, control and ease of installation
- Controller includes everything needed for installation
- IP65 protection
- For control of compressor, defrost, evaporator fan, lighting
- Alarm relay with the possibility of setting to auxiliary output
- Includes two temperature probes
- RS485 communication, line +(A)-(B)
| Power supply | 230 Vac |
| Design (panel size) | Other |
| Type of regulation | On/off |
| Control input | Temperature sensor |
| Output - relay | 5x |
| Display digit colour | Red |
| Producer | Pego |
Complete control of single-phase static or ventilated cooling systems up to 2 HP, with passive or electric defrost and direct or pump-down compressor shutdown.
Evaporator control by solenoid valve only or by remote request to motor condensing unit.
Direct control of the compressor, defrost, evaporator fan and lighting with direct outputs to each device, or voltage-free contacts for control of the condensing unit with its own electrical control.
Built-in electromagnetic circuit breaker for protection and shutdown of the refrigeration unit.
New innovative and elegant design. Transparent cover for access to the electromagnetic circuit breaker, all with IP 65 protection.
Auxiliary relay configurable parameters (alarm, setpoint, direct control via front buttons, door heater, remote control of the condensing unit motor, control of the solenoid valve to allow possible pump-down operation of the compressor).
RS485 for connection to Telenet monitoring system or output to standard Modbus-RTU protocol.
Easy installation and opening thanks to the new hinged cover.
| TECHNICAL PARAMETERS | |
|---|---|
| Dimensions | 262 x 168 x 97 mm |
| Weight | 0.6 kg |
| Power supply | 230 V AC ± 10% 50/60 HZ |
| Consumption | ~ 7 VA |
| Working conditions | -5 ... +50°C, < 90% Rh |
| Storage conditions | -30 ... +70°C, < 90% Rh |
| Temperature sensors | NTC 10 k? |
| Resolution | 0,1 °C |
| Accuracy | ± 0,5 °C |
| Range | -45 ... +45 °C |
| Outputs | Compressor: 1500 W Defrost: 3000 W Fan: 500 W Light: 800 W Configurable Alarm/Aux output: yes Monitoring system: Telenet, Modbus-RTU |
| El. protection | El.mag. circuit breaker 16A (Id=300mA) Id=30mA on request |
| Coverage | IP65 |
| Insulation type | Class II |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.