Pego ECP300 Expert VD4 - Wall-mounted three-phase control panel for cold stores - max. 8A

All in One wall-mounted controller for cold store - three-phase compressor max. 3kW
Pego ECP300 Expert VD4 - Wall-mounted three-phase control panel for cold stores - max. 8A
Pego ECP300 Expert VD4 - Wall-mounted three-phase control panel for cold stores - max. 8A
Pego ECP300 Expert VD4 - Wall-mounted three-phase control panel for cold stores - max. 8A (1)
624 EUR 516 EUR excl. VAT
In stock
In person in Prague:nowWith a delivery company:tomorrow
CodePE-010-110PNnapájení 400 Vstř., 2x NTC, 9x relé, jistič, 4-6,3A, rozměry 400x300 mm, montáž na stěnProducerPegoWarranty2 years

Dixell NG6 NTC temperature sensor

Dixell NG6 NTC temperature sensor
In stock
4,73 EUR excl. VAT5,72 EUR

Control panel for chillers with three-phase compressor up to 3 kW,
specially designed to ensure safety, protection, control and easy installation - all in one.

Power supply230 Vac
Design (panel size)Other
Type of regulationOn/off
Control inputTemperature sensor
Output - relay>5x
Display digit colourRed
ProducerPego

Complete control of a three-phase static or ventilated cooling system up to 3 kW (4 HP), with electric defrost and direct or pump-down compressor shutdown.
Evaporator control by solenoid valve only or by remote request to motor condensing unit.

Direct control of the compressor, defrost, evaporator fan and lighting with direct outputs to each device, or voltage-free contacts for control of the condensing unit with its own electrical control.
Built-in electromagnetic circuit breaker for protection and shutdown of the refrigeration unit.
New innovative and elegant design. Transparent cover for access to the electromagnetic circuit breaker, all with IP 65 protection.
Auxiliary relay configurable parameters (alarm, setpoint, direct control via front buttons, door heater, remote control of the condensing unit motor, control of the solenoid valve to allow possible pump-down operation of the compressor).
RS485 for connection to Telenet monitoring system or output to standard Modbus-RTU protocol.
Easy installation and opening thanks to the new hinged cover.

TECHNICAL PARAMETERS
Dimensions 400 x 300 x 135 mm
Weight 9 kg
Power supply 400 V AC ± 10% 50/60 HZ
Consumption ~ 7 VA
Working conditions -5 ... +40°C, < 90% Rh
Storage conditions -25 ... +55°C, < 90% Rh
Temperature sensors NTC 10 k?
Resolution 0,1 °C
Accuracy ± 0,5 °C
Range -45 ... +45 °C
Outputs Compressor: 370...3000 W
Defrost: 6000 W
Condenser fan: 800 W
Evaporator fan: 500 W
Light: 800 W
Compressor oil heating: yes
Solenoid valve control: yes
Configurable Alarm/Aux output: yes
Monitoring system: Telenet, Modbus-RTU
El. protection El.mag. circuit breaker 16A, 4-pole
Coverage IP65
Insulation type Class II
DescriptionTechnical parametersDownload

This online store saves cookies that help its proper functioning. By using our services, you agree to their use.

Detailed settingsAllow everything