Pego Expert Nano 1LT thermostat for cooling or heating
Simple and inexpensive panel thermostat for heating or cooling applications. One output relay.
Ordered from manufacturer
- Suitable for heating or cooling applications
- Allows passive defrost setting for cooling control
- Coloured icons on display to show current status
- One temperature input and one output relay for load switching
- Simple and quick setup, small number of parameters
- High IP65 front panel protection
| Power supply | 230 Vac |
| Design (panel size) | Other |
| Type of regulation | On/off |
| Control input | Temperature sensor |
| Producer | Pego |
| Output - relay | 1x |
| Display digit colour | Red |
Pego EXPERT NANO 1LT is an electronic temperature controller with one output relay, designed to control static cooling units operating at normal temperature with passive defrost (by stopping the compressor). It is equipped with one analogue input for NTC or PTC temperature probes and one relay for compressor control. The controller can also be configured for heating applications or for monitoring the measured temperature with alarm condition equipment.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 Vac +10% -15% 50/60Hz |
| Power input | approx. 3 VA |
| Input | 1x input for PTC temperature sensor (KTY 81-121, 990? @ 25°C) or NTC (10K? 1% @ 25°C) |
| Output | 1x switching relay 16A(6A) at 250 Vac, 1HP 250Vac |
| Dimensions | 93 x 37 mm, 59 mm deep |
| Front panel protection rating | IP 65 (NEMA 3S) |
| Operating conditions | -5 to 55 °C, max 90 RH% non-condensing |
| Measuring range | -45 to 99 °C |
| Display resolution | 1° or 0.1° |
| Overall accuracy | +/- (0.5% of range + 1 digit) |
DescriptionTechnical parametersDownload
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.