| Power supply | 24 Vac/dc |
| Design (panel size) | 32 x 74 mm |
| Control input | Digital signal |
| Auxiliary digital input | Yes |
| Output - relay | 2x |
| Display digit colour | Red |
| Producer | Ascon Tecnologic |
Tecnologic T31 is a programmable microprocessor timer with two outputs implemented by two relays. The device offers the possibility to program up to
The counting status is shown on the 4-digit display, while the status of the outputs is indicated by LEDs. The instrument can have 2 outputs (relay or transistor to control solid state relay - SSR) and 2 digital voltage free inputs for timing start (CNT EN) and reset - reset (RES).
Programming of the device is possible with the three front panel buttons, or with the programming key, or with a smart mobile phone with Android OS and NFC technology and the ATT-NFC app installed. Timing can be done with the front U button or the digital inputs CNT EN and RES on the rear terminal block.
| TECHNICAL PARAMETERS | |
|---|---|
| Inputs | 2 digital (start, reset) |
| Input type | voltage-free contacts |
| Power supply | 24 Vac / Vdc |
| Power input | approx. 3 VA |
| Timing modes for output 1 | delayed pull-in delayed waste cycler starting with switching on cycler starting from off single cycle starting with off |
| Timing modes for output 2 | identical to output 1 permanently on during timing same function as output 1 with different independent time same function as output 1 with different but dependent time signal-like buzzer |
| Time ranges | 9999 hours 99 h 59 min 59 min. 59 s 99,99 s |
| Outputs | 1x switching relay 16(9)A, 250 Vac 1x switching relay 5(1)A, 250 Vac |
| Accuracy | ± 0.1 % of range |
| Dimensions | 33 x 75 mm, depth 64 mm |
| Mounting hole | 29 x 71 mm |
| Front panel cover | IP65 with gasket |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.