Tecnologic TC34 LVRR digital counter with voltage inputs
size 32x74 mm, power supply 24 Vacdc, 2x digital voltage input, 2x output relay, 4 digit display
On request
- Digital Programmable Pulse Counter
- Two outputs
- 4 counting modes
- 2 digital inputs
| Power supply | 24 Vac/dc |
| Design (panel size) | 32 x 74 mm |
| Control input | Digital signal |
| Auxiliary digital input | Yes |
| Output - relay | 2x |
| Display digit colour | Red |
| Producer | Ascon Tecnologic |
The Ascon Tecnologic TC 34 is a programmable microprocessor counter with 1 or 2 outputs. The device offers the possibility to program:
- up to 2 setpoints
- 3 operating modes for OUT1 output
- 4 operating modes for OUT2 output
- 2 counting modes (up and down)
The counter gives the possibility to divide the read pulses by a constant. The counting status is shown on the 4-digit display, while the output status is indicated by 2 LEDs. The instrument can have 2 outputs (relay or transistor to control solid state relay - SSR) and 2 digital inputs - one to start counting (CNT) and one programmable as reset or reverse counting. The digital inputs can be voltage free contacts or or with voltage (same as the supply voltage). Programming of the instrument is possible by three buttons on the front panel , where there is also a reset button (U).
| TECHNICAL PARAMETERS | |
|---|---|
| Inputs | 2 digital (read, reset ) |
| Input type | or voltage signals of the same value as the power supply |
| Power supply | 24 Vdc +/- 10% 50/60Hz |
| Power input | approx. 3VA |
| Outputs | 2x switching relays 8(3)A, 250 Vac |
| Counting modes for output 1 | batch counting cycle with break continuous dose counting cycle total quantity counting |
| Counting modes for output 2 | identical to output 1 permanently switched on during counting same function as output 1, but with a different independent preset same function as output 1 with different but dependent preset |
| Reading type | direct (from 0 to preset) or reversible (from preset to 0) |
| Max. reading frequency (adjustable) | 2, 10, 40,125,1000 Hz |
| Reset signal delay | max. 15 ms |
| Range adjustment | possibility to divide the number of pulses read by 1 to 9999 |
| Displayed range | 0 - 9999 pulses |
| Dimensions | 33 x 75 mm, depth 64 mm |
| Mounting hole | 29 x 71 mm |
| Front panel cover | IP65 with gasket |
DescriptionTechnical parametersDownload