Tecnologic TC49 HCRR digital counter with potential-free inputs
- Digital Programmable Pulse Counter
- Two outputs
- 4 counting modes
- 2 digital inputs
| Power supply | 230 Vac |
| Design (panel size) | 48 x 48 mm |
| Control input | Digital signal |
| Auxiliary digital input | Yes |
| Output - relay | 2x |
| Display digit colour | Red |
| Producer | Ascon Tecnologic |
The Ascon Tecnologic TC 49 is a programmable microprocessor counter with 1 or 2 outputs. The device offers the possibility to program:
- up to 2 setpoints
- 3 operating modes for OUT1 output
- 4 operating modes for OUT2 output
- 2 counting modes (up and down)
The counter gives the possibility to divide the read pulses by a constant. The status of the counting is shown on the 4-digit display, while the status of the outputs is indicated by 2 LEDs. The instrument can have 2 outputs (relay or transistor to control solid state relay - SSR) and 2 digital inputs - one to start counting (CNT) and one programmable as reset or reverse counting. The digital inputs can be voltage free contacts or or with voltage (same as the supply voltage). Programming of the instrument is possible by three buttons on the front panel , where there is also a reset button (U).
| TECHNICAL PARAMETERS | |
|---|---|
| Inputs | 2x digital (read, reset ) |
| Input type | voltage-free contacts (also NPN transistor output from photocell) |
| Power supply | 100...240 Vac +/- 10% 50/60Hz |
| Power consumption | approx. 3VA |
| Outputs | 2x switching relays 8(3)A, 250 Vac |
| Counting modes for output 1 | batch counting cycle with break continuous dose counting cycle total quantity counting |
| Counting modes for output 2 | identical to output 1 permanently switched on during counting same function as output 1, but with a different independent preset same function as output 1 with different but dependent preset |
| Reading type | direct (from 0 to preset) or reversible (from preset to 0) |
| Max. reading frequency (adjustable) | 2, 10, 40,125,1000 Hz |
| Reset signal delay | max. 15 ms |
| Range adjustment | possibility to divide the number of pulses read by 1 to 9999 |
| Displayed range | 0 - 9999 pulses |
| Dimensions | 48 x 48 mm, depth 98 mm |
| Mounting hole | 45 x 45 mm |
| Front panel cover | IP54 with gasket, terminal cover IP20 with cover (gasket and cover at extra cost) |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.