Tecnologic TLK33 GEOOO controller for peltier cell control

Peltier controller with PID control based on temperature. Input for thermocouples, PTC, NTC, output for direct control + 2x output for SSR. Power supply 12...24Vacdc.
Tecnologic TLK33 GEOOO controller for peltier cell control
185 EUR 153 EUR excl. VAT
On request
In person in Prague:on requestWith a delivery company:on request
Code4T-040-332PNvstup PTC,NTC,Tč J,K,S, napájení 12..24 Vstř/ss, rozměr 33x74mm, 1x reg.výstup + 2x SSRProducerAscon TecnologicWarranty2 years

Dixell NG6 NTC temperature sensor

Dixell NG6 NTC temperature sensor
In stock
4,72 EUR excl. VAT5,72 EUR

Temperature probe Tecnologic FeCo - type J

Temperature probe Tecnologic FeCo - type J
In stock
18,90 EUR excl. VAT22,86 EUR

Temperature sensor Tecnologic Cr-Al - thermocouple K

Temperature sensor Tecnologic Cr-Al - thermocouple K
In stock
19,14 EUR excl. VAT23,16 EUR

PTC temperature probe Dixell S6.S - 2 m

PTC temperature probe Dixell S6.S - 2 m
In stock
9,45 EUR excl. VAT11,43 EUR
  • Precise PID control based on Peltier cell temperature
  • Input for J,K,S, PTC, NTC, mV signals
  • 1x control output
  • 2x alarm output for SSR

Power supply12-24 Vac/dc
Design (panel size)32 x 74 mm
Type of regulation2xPID
Control inputTemperature sensor
Output - relay0x
Output for SSR3x
Display digit colourRed
ProducerAscon Tecnologic

Ascon Tecnologic TLK33 are PID controllers adapted to control Peltier cells. The PID control follows a two degree of freedom algorithm, which optimizes the controllers' ability to operate with independent process variable and setpoint changes. The Peltier connects directly to the controller outputs, which allow automatic polarity reversal and can directly control loads up to 7A. There is also an output for reporting alarm conditions, and two adjustable digital inputs. Optional RS485 ModBus RTU serial communication is available. Depending on the version selected, the following can be connected to the controller input:

  • Pt100 thermocouples, J,K,S thermocouples, infrared sensors, mV signals (0/12...50/60 mV)
  • PTC, NTC thermistors, J,K,S thermocouples, infrared sensors, mV signals (0/12...50/60 mV)
  • Standardized analog current signals 0/4...20 mA
  • Normalized analog voltage signals 0...1 V, 0/1...5 V, 0/2...10 V

Other useful features of the Ascon Tecnologic TLK33 controller include:

  • Achieving the desired value at the desired speed
  • ramp and dwell function
  • Parameter protection at different levels
  • Several types of automatic PID parameter tuning, including overshoot control

TECHNICAL PARAMETERS
Power supply 12...24 Vdc ±10%
Consumption approx. 5 VA
Input TC J,K,S
IR sensors J,K
PTC, NTC
mV signals 0/12...50/60 mV
Output max. 7A, 12...24 Vdc for direct control of the Peltier cell
2x alarm output for SSR
Display 4 digits, red, height 12 mm
Operating conditions 0...50°C 30...95% RH (non-condensing)
Coverage IP65 with gasket
Dimensions 35 x 78 x 75.5 mm
DescriptionTechnical parametersDownload

This online store saves cookies that help its proper functioning. By using our services, you agree to their use.

Detailed settingsAllow everything