Tecnologic TLK72 HCRRR PID controller with three output relays
- Controller with double-acting PID control
- Automatic tuning of PID parameters
Comparison of Ascon Tecnologic TLK industrial controller series:
| TLK41 | TLK42 | TLK43 | TLK48 | TLK49 | TLK72 | TLK94 | |
| Dimensions (mm) | 48 x 48 | 48 x 48 | 48 x 48 | 48 x 48 | 48 x 48 | 72 x 72 | 48 x 96 |
| Power supply | 24, 100-240 Vacdc | 24, 100-240 Vacdc | 24, 100-240 Vacdc | 24, 100-240 Vacdc | 24, 100-240 Vacdc | 24, 100-240 Vacdc | 24, 100-240 Vacdc |
| Display | 1 line | 2-line | 2-line | 1-line | 2-line | 1-line | 2-row |
| Analog input | Universal | Universal | Universal | PTC, NTC, TcJ, TcK, TcS, Pt100, mV, V, mA | PTC, NTC, TcJ, TcK, TcS, Pt100, mV, V, mA | PTC, NTC, TcJ, TcK, TcS, Pt100, mV, V, mA | Universal |
| Digital input | optional | optional | |||||
| Relay/output for SSR | 4x | 4x | 4x | 3x | 3x | 3x | 5x |
| Analog output | 2x optional | 2x optional | |||||
| Retransmit setpoint | optional | ||||||
| On/Off and PID control | yes | yes | yes | yes | yes | yes | yes |
| Regulation of actuators | optional | optional | |||||
| RS485 | optional | optional | optional | optional | optional | ||
| Timer function | |||||||
| Programmer function |
| Power supply | 230 Vac |
| Design (panel size) | 72 x 72 mm |
| Type of regulation | 2xPID |
| Control input | Temperature sensor |
| Output - relay | 3x |
| Display digit colour | Red |
| Producer | Ascon Tecnologic |
The Ascon Tecnologic TLK 72 is a microprocessor-based single-loop controller with ON/OFF control, neutral zone ON/OFF and single-acting or dual-acting PID (direct or inverse function). It is also equipped with fast AUTOTUNING function, SELFTUNING function and automatic parameter calculation for FUZZY CONTROL during PID control.
Furthermore, the instrument is equipped with one digital input and RS485 serial communication using MODBUS-RTU communication protocol with baud rate up to 38,400 baud.
The controlled variable is displayed on a four-digit red display and the status of the outputs is indicated by three LEDs on the display.
The controller allows 4 setpoints to be stored in memory and can have three outputs: relay or solid state relay SSR.
Depending on the model, the following can be connected to the input:
model C: thermocouples (J,K,S and Tecnologic IRS infrared sensors), normalized signals ( 0 to 50/60 mV, 12 to 60 mV) and Pt100 resistance sensors
model E: thermocouples (J,K,S and Tecnologic IRS infrared sensors), normalized signals ( 0 to 50/60 mV, 12 to 60 mV) and PTC and NTC solid-state sensors
model I: standardised analogue signals 0/4..20 mA
model V: normalised analogue signals 0..1 V, 0/1..5 V, 0/2..10 V
Other important functions of the controller are:
- loop-Break Alarm
- reaching the desired value at the selected speed
- ramp and delay function
- soft-Start function
- compressor protection with Neutral Zone function
- parameter protection with different access levels
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 100...240 Vac ±10%, 50/60 Hz |
| Power input | approx. 5 VA |
| Input | j,K,S ; tecnologic IRS infrared Pt 100 signals 0...50 mV, 0...60 mV, 12 ...60 mV (1 M ? ) |
| Outputs | 3x relays 8(3) A / 250 Vac |
| Supported control types | ON/OFF, single-acting or double-acting PID |
| Overall accuracy | ±0.15% of range |
| Sampling rate | 130 ms |
| Dimensions | 72 x 72 mm DIN, 97 mm depth |
| Mounting | into a 67 x 67 mm panel hole |
| Degree of front panel protection | IP 54 in panel with gasket |
| Operating conditions | 0 ... 50 °C, 30 ... 95 RH% non-condensing |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.