Temperature and voltage converter to 4 to 20 mA signal on DIN rail with NFC
- For installation in switchboards
- High precision
- Suitable for increasing the immunity of the temperature sensor signal against interference over longer distances
- Easy and fast configuration, reading and editing of data using a mobile phone with NFC without the need to power the transmitter
- Data logger function
- Digital input for calibration
- Input/output galvanically isolated
- Power supply directly from current loop
- The Mypixsys configuration app for Android mobile phones can be freely downloaded from the Google Play Store
- sample HERE
| Analog output | Yes |
| Record of measured quantity | Yes |
| Measured quantity | Temperature |
| Power supply | 12-24 Vac/dc |
| Control input | Temperature sensor |
| Producer | Pixsys |
| Output - relay | 0x |
The temperature converter converts the signal obtained from Pt100, Ni100, K, S, R, J, T, N, B, E thermocouples and voltage to a standardized current analog signal of 4...20mA. It is designed for DIN rail mounting in a switchboard. The characteristics of these transmitters ensure high accuracy of temperature reading due to 16-bit precision A/D converter. At the same time, this solution allows the user to change the scale for the output signal.
Programming is done via RFid wireless technology (NFC) using an NFC-enabled mobile phone or the separately supplied programmer , which allows the operator to quickly perform all necessary calibrations and adjustments with the benefits of galvanic isolation thanks to wireless transmission technology. An app is available for Android mobile devices with NFC capability that allows you to program, adjust and view data in the field.
Non-volatile memory allows data logging with adjustable sampling frequency. Programming software (downloadable from the manufacturer's website) allows this data to be processed and the temperature curve to be displayed. Thanks to these features, this transmitter can also be used as a temperature logger.
| TECHNICAL PARAMETERS | |
|---|---|
| Pt100: Measuring range Resistance range Connection | -200...+800°C 18,5...378 ? 2, 3, 4 wire |
| Ni100: Measuring range Resistance range Connection | -50...+170°C 69...223 ? 2, 3, 4 wire |
| TC K: Measuring range | -260...+1360°C |
| TC S: Measuring range | -40...+1760°C |
| TC R: Measuring range | -40...+1760°C |
| TC J: Measuring range | -200...+1200°C |
| TC T: Measuring range | -260...+400°C |
| TC N: Measuring range | -260...+1280°C |
| TC B: Measuring range | +40...+1820°C |
| TC E: Measuring range | -260...+940°C |
| voltage: Measuring range | -10...+70 mV |
| Dimensions | 1 DIN module |
| Power supply | 6...32 Vdc |
| Output | 4...20 mA, 2µA resolution |
| Error output | Adjustable, 21.5mA or 3.8mA |
| Output overcurrent protection | approx. 30 mA |
| Maximum conversion error | 0.1% of range or 0.2°C (higher of the two) |
| Line resistance | 20? maximum |
| Temperature coefficient | < 100 ppm |
| Sampling | 300 ms |
| Response time (10...90%) | approx. 600 ms |
| Coverage | IP20 |
| Standards | CE, EN 61000-6-4, EN 61000-6-2 |
| Operating conditions | -40...+85°C 30...90% RH non-condensing |
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.