Thermostat ATC-300A with timer for aquariums and terrariums
- Production completed
- Replacement: DTC-120
- 2 sockets, one temperature controlled, one time controlled
- Clear display
- 2m temperature sensor
| Producer | Xjet |
The device allows you to regulate the temperature in the terrarium or aquarium and timed switching of other outputs (airing, lighting). The device consists of 2 parts, which are connected together by a 1.75 m long cable.
1.Control part with display - this part can be easily attached to the glass using the 2 supplied Velcro stickers. A 2 m cable with a plastic or metal end and suction cup also leads from the control section to the glass.
2. Power and switching section - consists of a mains plug with built-in adapter and two sockets. One socket - marked I - is for heating control only. This is where the heating element is connected. The second socket - marked II - is for time switching. This is where the terrarium lighting or aquarium air conditioning is connected.
| TECHNICAL PARAMETERS | |
|---|---|
| Power supply | 230 Vac ± 10 %, 50-60 Hz |
| Measuring range | 0 to +50°C |
| Timing units | hours |
| Display | LED, three-digit red, digit height 13 mm |
| Accuracy | ± 1°C |
| Resolution | 0,1 °C |
| Hysteresis | 1°C |
| Maximum permissible output load | 1200W/230V |
| Dimensions of the control part | 31 x 120 x 17 mm (h*w*d) |
| Thermostat input power | Max 1.5W |