Pego NECTOR wall thermostat with touch control and extended connectivity including MyPego app

Pego NECTOR wall thermostat with touch control and extended connectivity including MyPego app

Nector makes signals accessible. Always connected.

Automatic sending of notifications in case of an anomaly in the cooling room. 24/24 accessibility via app to check the status of the cold room. Scheduling of maintenance interventions. Time-based organisation. Emergency management.

Simplifies administration. Active monitoring.

MyPego Total Control application 24/24

Turn your smartphone into a user terminal on the dashboard with Bluetooth connectivity. Get real-time information on Nector activities and easily plan them. Analyse historical data in graphical form. Instant and detailed notifications alert you wherever you are, thanks to the Pego Cloud connection.

The smart choice. Everything is visible at a glance.

Basic design. The large display and white backlight make reading easy even at longer distances. The multi-touch capacitive display system makes it easy to use the functions. PMMA surface adds a timeless aesthetic.

What can't you see? No problem... discover it with a gesture!

Differential breaker. Import/export configuration and history download from USB port. Expansion module.

Your data is safe with the integrated data logger

USB

integrated for data download

Cloud

teleNET data history storage

data storage and consultation

ModBus

for connection to your systems

Even without power

thanks to battery backup

Display

• Large white LED display with low power consumption
• Height of temperature digit: 38 mm
• RGB status bar (red, green, blue)

Keypad

• PMMA (polymethyl methacrylate) easy-to-use capacitive multi-touch

Box

• Material: self-extinguishing PC-ABS UL94 V0 class
• Protection class IP65: box fully protected against dust and direct water current according to EN60529:1991+A1:2000+A2:2013+AC:2019.

Ambient conditions

• Operating temperature: -5 +40 °C
• Storage temperature: -10 +70 °C
• Relative ambient humidity: less than 90% relative humidity (non-condensing)

Electrical properties

• Electrical insulation: Class II
• Integrated bipolar differential magnetothermal for protection and distribution of cooling unit: (may vary depending on model): 16A Id=300 mA, 4.5 kA tripping capability, C-curve
• Supply voltage: 85 - 260 Vac (±10%) single phase
• Supply frequency: 50/60 Hz
• Max. power consumption: 1.5 kW (0.5 kPa): ~10 VA

Battery

• Optional backup battery that maintains active real-time temperature and humidity records in the event of main power failure.
• Internal power supply: 1: 12V, Ni-MH, 1300 mAh, 40 h autonomy.

Inputs

• 7 configurable digital inputs (in 16 modes).
• 4 NTC 10 k? temperature probes at 25 °C
• 4-20 mA input configurable as humidity or pressure probe.

Measurement range

• Temperature measurement range: -45 +99 °C
• Humidity measurement range: 0 100 Rh%
• Pressure measurement range: -1 90.0 Bar

Probe resolution

• Resolution of temperature probes: 0.1 °C
• Humidity probe resolution: 1.0 °C 1 Rh%
• Pressure probe resolution: 1.1 Rh%: 0.1 bar

Outputs

• Voltage-free contacts
• Direct compressor control, defrost resistors, evaporator fans, cell indicator.
• 2 configurable digital outputs in 11 modes.
• Analog output: 0-10V for fan control

Maximum output

• Compressor: 1500 W (AC3) 30 A
• 3000W (AC1) 30A (variable by model)
• Fans: 500W (AC3) 16A
• Cold room lighting: 800W (AC1) or 100W for LED lights 16A
• Configurable Output 1: 100W AC1 10A
• Configurable Output 2: 100W AC1 10A

Designation

• Normative Reference: CE, EN 12830
• Suitability: S (storage)
• Type of climatic environment: A
• Accuracy class: 1

Connection

• Wi-Fi 802.11 b/g/n (2.4 GHz) up to 150 Mbps
• Ethernet 10/100 Mbps
• Bluetooth Low Energy (BLE)
• RS485 serial communication Modbus-RTU / TeleNET

Bluetooth

• Complete remote control of the device
• Daily historical display and system status

Cloud

• Real-time system status display
• Parameter display and daily history
• Receive real-time alarm notifications
• Subscription-enabled features

Monitoring

• RS485 for connection to TeleNET monitoring network o ModBUS
• TeleNET software available for free download from www.pego.it to store and view data downloaded via USB memory from NECTOR panels.
• Integrated local web server with complete remote control of the instrument.

USB functions

• Download of recorded data
• Parameter import/export function
• Software update function

Datalogger

• Data logger function with up to 2 years of ambient temperature and related alarms
• Instant recording of alarm events and digital inputs
• Data download to external USB memory in Pego PG3 and CSV format

Cold storage function

• Control of defrosting in steady state, with resistance, hot gas or resistance controlled thermostat
• Real-time defrosting in hours
• Direct hot gas defrost control by solenoid
• Dual evaporator control with dual end defrost probes
• Emergency operation (in case of a faulty ambient probe)
• Pump discharge operation
• Configurable cold/hot mode
• Energy savings through day/night setpoint control and intelligent defrost
• Humidification function with dedicated 4-20mA humidity probe (humidity probe not included)
• Condenser or evaporator fan speed control with 0-10V analog output and dedicated pressure probe
• Alternating display of ambient temperature and humidity on the display