Accessories for industrial control
1
Dixell C-BOX Box for wall mounting of controllers 32x74 mm
17,26 EUR
Box made of non-flammable material for wall mounting of controllers
2
3
Dixell XJ485CX interface for TTL to RS485 conversion
17,06 EUR
for Dixell devices with HotKey connector, 24Vdc power supply, galvanically isolated
4
Power transformer 12V and 24V 5VA
18,85 EUR
Power supply 230Vac, output 12Vac and 24Vac, input 5 VA, size 59 x 54 x 38 mm, screw terminals
5
HotKey 64 programming key for Dixell controllers
17,91 EUR
Programming key for fast programming of higher series devices, e.g. IC
6
Solid State Relay Celduc SO942460 25A Single Phase
33,38 EUR
25A Solid state relay (SSR), switched and open at zero, suitable for applications with resistive loads. Replacement for Celduc SO942560
7
Temperature to 4 to 20 mA signal converter
49,25 EUR
2000.35.010 Converts the signal from Pt100, Pt1000, Ni100 temperature sensors to a standardized analog current signal of 4...20 mA. Measured valu...
8
Measuring transformer 50A with RS485 and 0 to 10V output
142 EUR
It converts the signal from the measuring transformer to a normalized voltage signal of 0..10V and RS485 ModBus. It works with TrueRMS value of A...
9
Thermal conductive paste 35g 0,61W/mK
19,40 EUR
Paste to improve heat transfer to temperature probes. For temperature range -70...+250°C. Suitable for temperature probe sumps.
1
3
Solid State Relay Maxwell MS-3AA4825 25A Three Phase
50,74 EUR
Three-phase SSR, mains voltage controlled, switched and switched at zero, suitable for applications with frequent switching of resistive loads.
4
TT-500 temperature converter to 0 to 10 V voltage signal
26,86 EUR
Temperature converter to head with 0-10 Vdc output
5
Solid State Relay Maxwell MS-3DA48100 100A Three Phase
68,65 EUR
Three-phase solid state relay (SSR), switched and open at zero, suitable for applications with frequent switching of resistive loads.
6
Solid State Relay Celduc SAL965460 for DIN
65,16 EUR
32A Solid state relay (SSR) with integrated heat sink, DIN mounting, switched and open at zero, suitable for applications with resistive loads.
7
Solid State Relay Celduc SUL963460 on DIN for DRR450 controller
57,40 EUR
30A Solid state relay (SSR) on DIN, with integrated heat sink, switched and open at zero, suitable for applications with resistive loads.
8
9
HotKey programming key for Dixell controllers with USB-C power supply
17,91 EUR
Programming key for quick programming of Dixell instruments without the need for external controller power
BestsellersNews
FilteringPrice
Power supply(10) (11) (11) (1) (1) (4) (16) (5) (24) (11) (1) (9) (3) (47) (14) (5) (1) (19) (5) (2)
106 products
Code:9T-010-060
Power transformer 12V and 24V 5VA
In stock
Power supply 230Vac, output 12Vac and 24Vac, input 5 VA, size 59 x 54 x 38 mm, screw terminals
Code:4T-140-056
Programming key Ascon Tecnologic A015 with power supply for controllers with 5pin connector
In stock
Programming key 5pin connector, for Ascon Tecnologic TLK3x series controllers, with power supply and...
Code:4T-140-057
Programming key Ascon Tecnologic A013 with power supply for controllers with 3pin connector
In stock
Programming key 3pin connector - for Ascon Tecnologic TLK4x series controllers, with power supply an...
Code:4T-110-020
Tecnologic TA100 Measuring current transformer 100A
In stock
Current transformer with 100/0.2 A conversion for HB function of Ascon Tecnologic controllers
Code:9T-020-092
Dixell C-BOX Box for wall mounting of controllers 32x74 mm
In stock
Box made of non-flammable material for wall mounting of controllers
Code:9T-020-141
Dixell MDP/CX back cover for CX controllers
In stock
Dixell XR CX and CH series terminal block and body cover against dripping moisture
Code:2D-020-136
Interface Dixell XJ485USB-KIT for programming controllers from PC via USB
In stock
For easy programming of Dixell instruments.
Code:2D-020-135
Dixell ProgToolKit interface for programming Dixell controllers and devices
In stock
For easy programming of Dixell instruments
Code:9T-020-091
Dixell C-BOX2 Wall mount controller box 32x74 mm
In stock
Box made of non-flammable material for wall mounting of controllers
Code:2D-070-020
Connection cable Dixell CAB/RS 1
In stock
1 m long cable with connectors, for connecting TTL output to RS485 suitable for DIXELL XJ485
Code:9T-020-080
Rubber gasket for Tecnologic 33x75 mm instrument panel
In stock
Rubber gasket for Tecnologic 33x75 mm instrument panel
Code:9T-020-075-4
Dixell RG-V gasket
In stock
Rubber panel gasket for Dixell instruments 100x64 mm
Code:2D-020-105
Connecting cable Dixell CAB 55F
In stock
Cable to connect X-REP remote display and Dixell controllers, 5 meters
Code:2D-070-012
Dixell XJ485CX interface for TTL to RS485 conversion
In stock
for Dixell devices with HotKey connector, 24Vdc power supply, galvanically isolated
Code:3D-300-090
Connection cable Dixell CAB/CJ15 1,5m
In stock
2 pin cable with connector for analog output, digital input, keyboard,... Length 1,5m.
Code:3D-300-102
Dixell CW-KIT 0.35m connection cable with 12-14pin female connectors
In stock
Cable 0,35m with connectors (12-14pin, female) for DIXELL series IC100C, IC100L, XC650CX, XC652CX
Code:3D-300-099
Connection cable Dixell CWC15-KIT 1,5m with connectors 6-14pin female, for models with triac
In stock
1.5m cable with connectors (6-14pin, female) for DIXELL IC100CX series with triac and XC645CX
Code:9T-020-142
Dixell PA/CX Plastic protective cover for regulators 32x74 mm
In stock
With rubber panel seal for Dixell CX series instruments (32x74 mm)
Code:3D-300-100
Connection cable Dixell CW15-KIT 1,5m with connectors 12-14pin female
In stock
1.5m cable with connectors (12-14pin, female) for DIXELL series IC100C, IC100L, XC650CX, XC652CX
Code:3D-300-103
CF-KIT press-fit connector for IC100C, IC100L
In stock
Press-on connector for DIXELL IC100C, IC100L series
Code:3D-300-091
Connection cable Dixell CAB/CJ30 3m
In stock
Cable with 2-pin connector for connecting analog output, digital input, keyboards. Length 3m.
Code:1P-700-120
Current, voltage and resistance converter for 4 to 20 mA signal on DIN rail with NFC programming
On request
Converts 0..20 mA / 4..20 mA / 0..10 V / 0..4kohm signals to a normalized 4...20 mA current signal. ...
Code:1P-700-135
Wattmeter - power converter to RS485
On request
It converts the voltage and current value from a single-phase measuring transformer to a power value...
Code:KS-050-010
Thermal conductive paste 500g 0,61W/mK
Over a week
Paste to improve heat transfer to temperature probes. For temperature range -70...+250°C. Suitable f...
Code:1P-400-990
Connector for Pixsys ATR902
On request
Counterpart to the eight-pole connector of the Pixsys ATR902 controller
Code:9P-900-900
Regulator cut-out plug 32 x 74 mm
On request
For blanking the 29 x 71mm cut-out for the 32 x 74mm regulator.
Code:1P-600-930
Pixsys NET200-1AD RS232/USB to RS232/RS485/RS422 converter
On request
Converter with automatic configuration for RS232/USB to RS232/RS485/RS422 conversion
Code:2D-020-130
HotKey 64 programming key for Dixell controllers
Ordered from manufacturer
Programming key for fast programming of higher series devices, e.g. IC
This online store saves cookies that help its proper functioning. By using our services, you agree to their use.